PBV1005A – Pressure Balance Valve With Integrated 2-Way Diverter
- Solid Brass Construction
- Integrated 2-Way Diverter
- 1/2″ NPT Male Connections
- Extension Available – PBV.2100E**
- Rough Brass
INSTALLATION, OPERATION & MAINTENANCE VIDEO:
The PBV1005A – Pressure Balance valve with an integrated 2-way diverter has a ½” NPT male connection valve with two inputs for hot/cold water and two outputs. The valve has a flow rate of 5.5 GPM @ 60 PSI.
SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.
HANDLE OPERATION – The volume and temperature of the water are controlled by the bottom handle. Lift the handle to control the volume and as the handle is moved between left and right, the temperature changes. Move it right for cold and left for hot water.
The diverter handle on the top diverts the flow from the two outputs of the valve. With the diverter handle pointing left, the water flows through the lower output. With the diverter handle pointing right, the top output is activated for water flow.
CUT OUT DIMENSIONS – The cut out in wall should be 5.43” x 4.76” Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall.
TRIMS – The trim set for PBV1005A consists of a trim plate and handle knobs for both top and bottom cartridges. Extension kits for both handles can be ordered separately in case the handles need to be extended for proper fit. Any trim ending in *2100 or *2101 can be used with this valve. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.
|Item Category||Pressure Balance Showers|
|Item Sub Category||Rough Valves|
|Flow Rate @ 60 PSI||5.5|
|Fast Ship Finish||Rough Brass|
|Installation Type||Wall Mount|
|Number Of Handles||2|
|Cartridge Info||Flühs 12004, Hain-Yo HL-40|