Select Page

260.2693 – 3/4″ Horizontal Thermostatic Shower Valve With Volume Control & Trim – 1-Output

$884.00

PRODUCT BREAKDOWN:
SPECIFICATIONS:
  • Solid Brass Construction
  • Includes Thermostatic Valve – TVH.2693
  • With Integral Service Stops
  • Single Output
  • Use in Tub & Shower Applications
  • Extension Available – Part # TVH.4101E**
  • Flow Rate 8.0 GPM @ 60PSI
AVAILABLE FINISHES:
  • Matte Black – $926
  • Brushed Nickel PVD – $905
  • Polished Nickel PVD – $905
  • Chrome – $884
  • Satin Brass – $926

The TVH.2693 Thermostatic valve features 3/4″ NPT connections and has 1 water output. There are 2 settings or positions on the left handle of this product. They are as follows:

Position 1 – Output 1 Active
Position 2 – OFF – No Water Flow

The right handle sets the temperature.

Supply Stops
 – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.

Handle Operation
 – The right handle is used to control the temperature of water flowing through the outlet. The volume of water is control by the left most handle. The left handle is capable of controlling the volume of water from a trickle to full flow.

As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. Also the value must be installed straight and not at an angle or upside down. In case, the tile is thicker or valve is installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.

Cut Out Dimensions
 – The cut out in wall should be 8.07 X 2.08 Inches and no more – this will ensure that the trim plate will cover the cut out hole in the wall.

Trims
 – The trims comprise of a well finished cover plate and handle knobs. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the handle knob which has a push button on the side. In order to adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.

Weight 7.4 lbs
Collection Serie 260™
Item Category Thermostatic Showers
Item Sub Category 1 Output Therm. Valves & Trims
Flow Rate @ 60 PSI 8
Style Contemporary / Modern
Fast Ship Finish Brushed Nickel PVD, Chrome, Matte Black, Polished Nickel PVD
Installation Type Wall Mount
Handle Type Knob, Lever
Number Of Handles 2
CAL Green Compliance Yes

Spec Sheet

Parts Diagram

Installation Documents